Shenja per te gjitha Sniperkat

 

 

 

 

 

 

 

Download : Click Here

 

The AXMC multi caliber sniper rifle is chambered either for the .338 Lapua Magnum, .300 Winchester Magnum, 7.62×51mm NATO/.308 Winchester. It features parts that dimensionally or otherwise are not interchangeable with the AW rifle series.[23] With an AXMC caliber conversion kit, the AXMC can change calibers in minutes by exchanging the bolts, magazines and barrels. Converting to the 7.62×51mm NATO cartridge, an additional magazine converter must also be fitted within the magazine port to allow the use of an Accuracy International AX308 magazine. A single shroud/firing pin assembly is provided for each multi caliber weapon system and must therefore be installed into the required bolt assembly as part of the conversion procedure.

Compared to the AWM, the bolt action of the AXMC is longer and wider and the internal magazine is lengthened, allowing the unimpaired use of .338 Lapua Magnum cartridges loaded to the C.I.P. (Permanent International Commission for the Proof of Firearms Portable) maximum allowed overall length of 93.50 mm (3.681 in).

The AXMC bolt is 22 mm (0.87 in) in diameter and the bolt, bolt head, locking ring and barrel tenon construction were designed to be significantly stronger and more capable of handling higher chamber pressures and temperatures and thus higher bolt thrust safely compared to the AWM variant. The bolt construction is significantly revised, allowing the bolt to be field stripped by hand and allowing the more complex removal of the bolt head from the bolt body with simple hand tools. Caliber changes can be accomplished by the change of a complete bolt assembly or a caliber specific bolt sleeve, which is more laborious. The interior of the bolt has a new safety feature added that will prevent the rifle from firing on a partially closed bolt. An improved leaf-spring AW 7.62 style extractor should enhance the cycling reliability of the bolt action. This extractor can be removed and reinstalled with the help of a bullet tip. The top of the receiver features a MIL-STD 1913 Picatinny rail for mounting aiming optics. The AXMC has a 30 MOA forward canted optical rail optimized for extreme long range shooting. The diameter of the barrel threading was enlarged and is unique to the AXMC. The rifle is fitted with a 27 in (686 mm) long .338 in (8.6 mm) caliber free floating fluted barrel as standard. The AXMC has a non conventional 238 mm (1:9.375 in) twist rate to adequately stabilize longer, heavier .338 caliber very-low-drag projectile designs that became more common in the 21st century. Other barrel lengths, calibers and twist rates are available as options. The two-stage trigger has a new trigger shoe that can be moved for and rearwards by 0.5 in (13 mm) and has a 15 to 20 N (3.4 to 4.5 lbf) adjustable trigger pull. The AXMC uses new 10-round double stacked .338 Lapua Magnum steel magazines that are inserted into a revised magazine well.[24][25]

Further, the AXMC features a revised external chassis stock system with an octagonal shaped fore end which envelops the free floating barrel offering modular attachment points for user (re)movable MIL-STD 1913 Picatinny accessory rails on four sides. Several lengths of octagonal shaped fore end and Picatinny accessory rails are available as options. The folding rear of the stock can be fitted with an optional butt spike. The minimal possible length of pull was reduced compared to the AICS stocks to facilitate usage when wearing thick clothing or body armor. The stock has a left-right and height adjustable cheekpiece as standard or can be fitted with an optional quick adjustable cheekpiece. The cheekpiece contains a 4 mm hex wrench used for various adjustment, removal and (re)mounting procedures. The pistol grip can be fitted with backstraps of differing sizes that combined with the movable trigger shoe enables the trigger to be tailored to the individual shooter.

The AWM-F was the first AW variant featuring a folding stock and has been adopted since its first introduction in the German Army in 1998, and by other several armies: (See the Arctic Warfare Magnum to see the full list.)

The G22 (Gewehr 22 or Scharfschützengewehr 22) by German Army, it features a folding stock and is chambered for the .300 Winchester Magnum round (designated 7.62×67mm).

The Dutch army also adopted the AWM-F that is chambered for the .338 Lapua Magnum.

AW50 (Arctic Warfare .50 caliber)
The AW50 was introduced in 2000 by the British and Australian armed forces and is an AW rifle re-engineered and chambered for .50 BMG (12.7×99mm NATO).

The German Army adopted the AW50 and designated it as the G24 (Gewehr 24 or Scharfschützengewehr 24).

AW50F (Arctic Warfare .50 caliber Folding Stock)
The AW50F is a variant of the AW50 adopted by the Australian military. It differs from the standard AW50 in that it is fitted with a folding stock (hence the F) and Madco barrel.

AE (Accuracy Enforcement)
The Accuracy International AE was introduced in 2001 as a cheaper, somewhat